NEWS CENTER
-
Company News
-
Industry News
-
microphone AY-863 news
-
microphone wired microphone news
-
wireless microphone news
-
gooseneck conference microphone news
-
Tie-clip microphone news
-
Studio Microphone news
-
Interview Microphone news
-
Karaoke microphone news
-
uhf wireless microphone AY-3200 news
-
uhf ktv wireless microphone AY-URX7Ⅱ news
-
wireless vhf microphone AY-766 news
There are several forms of connection between the loudspeaker and the loudspeaker
- Categories:Company News
- Author:
- Origin:
- Time of issue:2021-09-07
- Views:0
(Summary description)If it is a home audio system, it is recommended to connect according to the instructions. Of course, if the power of the amplifier allows, the following connection methods can also be used at the same time. Since the output of the
There are several forms of connection between the loudspeaker and the loudspeaker
(Summary description)If it is a home audio system, it is recommended to connect according to the instructions. Of course, if the power of the amplifier allows, the following connection methods can also be used at the same time. Since the output of the
- Categories:Company News
- Author:
- Origin:
- Time of issue:2021-09-07
- Views:0
If it is a home audio system, it is recommended to connect according to the instructions. Of course, if the power of the amplifier allows, the following connection methods can also be used at the same time. Since the output of the loudspeaker contains an output transformer, for ease of use, there are generally low-voltage and high-voltage windings at the secondary end of the output transformer. The low-voltage winding is suitable for direct connection with low-impedance speakers without the need for line transformers Speakers are generally connected in series), but this method is generally only suitable for less than 30 meters. The line loss increases sharply beyond this distance. The specific calculation formula is: power P = square of voltage / resistance (impedance of the speaker + resistance of the wire) . The high-voltage winding (120V) output is suitable for long-distance broadcasting. At the speaker end, an inter-transformer must be connected first, the secondary end of the inter-line transformer is connected to the speaker, and the primary end of all inter-line transformers are connected in parallel with the broadcasting line.
Scan the QR code to read on your phone

