Universal wireless microphone AY-W12 frequently disconnects automatically during meetings, what should I do?

1. Pay attention to the operation

A wireless conference system consists of a host and a microphone. The host can generally set the number of openings of the Universal wireless microphone AY-W12. One of the modes is the first-in-first-out mode. The host sets the maximum number of microphones to open. In this case, the system Only 4 microphones can be turned on and used at the same time, but when the 5th person turns on the 5th microphone whether intentionally or unintentionally, among the 4 microphones in use before, the 1st microphone will be forcibly turned off. When using wireless conference microphones, pay attention to the operation of the number of microphones turned on. In addition to the first-in first-out mode, the wireless conference microphone series products of Guangdong wireless conference microphone manufacturer Gestton also have a last-in-last-out mode.

2. Pay attention to the line

The problem of insufficient power supply caused by line aging and poor contact is unpredictable, so it is not easy to troubleshoot. It is recommended to use the experimental exclusion method, which can be connected to the system multiple times, and the connection order of each conference microphone can be changed in order to check, but it is relatively cumbersome. If the problem of Universal wireless microphone AY-W12 itself is ruled out, and conditions permit, it is recommended to replace the line.

After reading the above answers, has your problem been solved? Hope the above article is helpful to you.