Nowadays, people who use magic wired karaoke microphones want to make their voices more thorough, and how to make their voices and accompaniment have a good degree of integration. There are many such problems, and some friends are very anxious to solve these problems, so they I will go to the Internet to refer to some parameters given in those posts to make adjustments, how much to attenuate which frequency band, how much to gain in which frequency band, etc. In this case, sometimes I don’t even understand what those parameters mean, and changing these parameters will bring What kind of changes come, always debug blindly, but often get twice the result with half the effort.

Some people are still using the headset to record the parameters every day, and adjust their effects according to the numbers seen in some posts. The attenuation or gain of a certain frequency band is in decibels (dB), most people do not know, magic The wired karaoke microphone did not capture the frequency band he was struggling to adjust at all! Common magic wired karaoke microphones can be roughly divided into the following four categories: headsets, conference microphones, dynamic microphones, condenser microphones, due to the pickup heads of various microphones The working principles of these four microphones are very different. The human voice recorded by the headset and conference microphone has clear high frequency and low frequency acquisition. In addition, due to the high sensitivity, there may be spray microphone. The principle of the moving coil microphone is to stick a coil on the diaphragm of the microphone, and the coil is between the poles of the magnet. When the microphone is placed in the sound field, the diaphragm vibrates with the sound wave, and the coil moves between the two poles to cut the magnetic field lines, thereby converting the sound wave into a tiny current, which will have a voltage output after passing through the transformer.

Simply put, it uses sound waves to push the diaphragm, and then the diaphragm drives the coil to generate a weak voltage by changing the magnetic lines of force. This magic wired karaoke microphone is light in weight and small in size, which is very suitable for pop singers' stage performances. However, as a microphone for computer recording and singing, it also has certain limitations. Even if a high-quality dynamic microphone is used, it can be recorded The vocals will still feel suffocated due to insufficient high frequency and too much mid-low frequency. The general frequency response range of magic wired karaoke microphone is 20Hz~20KHz, the audio frequency of various frequency bands can be collected more realistically, and the sensitivity and signal-to-noise ratio are high.

If you use a good magic wired karaoke microphone, then the windshield is indispensable. Microphones with high sensitivity are more responsive to the airflow in your mouth, and the phenomenon of microphone spraying will be obvious. Can be equipped with a windshield, the price is not high, the effect is very good.